Bashers Arrive in Fours, Still Give the Devils Hell

The Arrival – Swiper Time, Scenic Detours & a Bashers Headcount Crisis

The Bashers arrived — or rather, trickled in — to NAIS’ picturesque new ground. Pretty, petite, and surrounded by the kind of tranquillity that did not foreshadow the chaos to come.

Swiper, ever keen to get to a cricket ground, began his solo pilgrimage from the far reaches of Suzhou (adding to his Trans-Pacific voyage) and was, unsurprisingly, the first to arrive. No trains, no carpools — just raw dedication and Didi as a sidekick.

Shortly after, Haseena rolled in with Paps and Mr. Tickle in tow, forming the core of the early Bashers contingent. The rest? Scattered across time zones, group chats, and varying definitions of “on the way.”

Soapy, meanwhile, took the scenic route via SRFC, later claiming (with a straight face) that he only went there to “pick up the team kit.”

With just four players present and full confidence in the chaos to come, Haseena strode up to the toss, won it, and—naturally (with not much of a choice)—chose to bat.

Batting – Starts, Smashes & Sudden Collapses

Haseena sent in Swiper and Paps to open with the kind of confidence that neither batter likely shared — but for a moment, it looked like he might be on to something. Swiper started solidly, looking in good touch, playing a few crisp strokes that suggested he meant business. But cricket, being cricket, had other plans. In a stroke of misfortune that could only be described as cosmic trolling, he picked out the only fielder in the same postcode — dismissed in the unluckiest fashion, since Paps on the other end intended to use up all the luck allocated for the day.

Paps, meanwhile, began working through his nine feline lives. The feline nature was put into question when he begrudgingly ran a three with Juggler, who had replaced Swiper and looked absolutely thrilled about the cardio.

Juggler’s stay was brief but dramatic — caught and bowled trying to punch one back down the ground. The kind of dismissal that says “I’m here for a good time, not a long time.”

Then came Mr. Tickle, who started like a Test opener with front-foot defence before deciding that he only knows how to hit the long ball instead of the text book batting. He launched a blistering 50 with six sixes — including three in one over. Paps, not one to be upstaged, joined the fireworks, reaching his own half-century before finally falling — either to the bowling or gravitational fatigue.

A minor collapse followed, but thanks to some tail-end contributions and a solid platform already laid, the Bashers posted a healthy 232 — well above par for a side that started the day with a four-man squad.

Bowling/Fielding – Slips, Strikes & Surprise Appearances

Suka and Juggler took the new ball, keen to reclaim the lives Paps had borrowed earlier. Soapy, living up to his name, dropped two catches like the ball was dipped in baby oil. But Juggler made amends by bowling one of the openers, knocking over the furniture and lifting Bashers’ spirits.

Then came Swiper’s catch of the century (that’s what he claims it to be) — a running, over-the-shoulder grab taken at full speed and the last possible moment. A moment that belonged on highlight reels and motivational posters, and something he is intent on not letting people forget. 

The Devils lost three but began to consolidate, keeping the chase alive. Some animated sideline coaching from their captain put pressure on the batter — and DRS capitalized, bowling him around his legs. DRS continued his spell of destruction, finishing with a 3-wicket haul.

With runs flowing again, Haseena made a bold call — pulling Yeti Dick from behind the stumps and tossing him the ball. The original bowling openers returned, and momentum swung. Suka’s clever low full toss tempted Lobo into a big hit — and guess who was waiting underneath it? Swiper again, clutching his second catch this time with gloves on, and completing his fielding redemption arc (which included gifting five penalty runs earlier).

Then, just as the Bashers began feeling the heat, Fling mysteriously appeared near the rope. No one quite knew when or how. Before he could say hello, Paps had thrown him into the deep field, taking full advantage of the surprise arrival. No warm-up. No explanation. Just field.

From there, the Bashers hunted in packs. Yeti Dick rushed the batters, bowlers choked the runs, and the Devils’ innings limped toward the finish.

The final blow? Soapy — from the deep — with a direct hit. Redemption in one throw. Game over.

Bashers win — narrowly, gloriously.

Post-Match – Fines and Froth at Momentum

Celebrations carried over to Momentum — the sleek new, not-yet-open venue proudly sponsored by the fine folks who brought us 521. It was christened the only way the Bashers know how: with a fines session.

Classic Keeper Wicket Keeping Gloves

In a recent acquisition, I obtained a pair of wicket-keeping gloves from Classic Keeper, and in hindsight, my only lament is not having made this investment earlier, especially during the time when I was actively immersed in cricket. Although these gloves may be considered slightly more expensive compared to their mass-produced, off-the-shelf counterparts, it’s abundantly clear that this investment pays dividends in the long term. Reflecting on my cricket journey, I’ve likely spent more on cheaper gloves to get to this point. This is truly one of those items that you buy for life.

I must make special mention of Graham, who stands in a class of his own. He was exceptionally pleasant, attentively listened to my preferences, and provided invaluable guidance. The result was a pair of gloves that truly epitomize the phrase “fits like a glove.”

I’d like to share some of the invaluable advice that Graham offered for breaking in these gloves and ensuring their proper care.

Breaking in the Gloves

Graham from Classic Keeper, the skilled artisan behind these gloves, has implemented a thoughtful method to preserve their intended shape. The gloves are secured with an elastic band, ensuring they conform to the desired molding and cupping position. Alternatively, they can be rested with palms facing upwards and supported by a book or similar object to achieve the same effect, all without causing any damage.

People often share a common sentiment when it comes to new gloves – they love the idea of owning them but dread the process of breaking them in. Fortunately, Graham’s gloves are designed to strike a balance. They won’t be excessively stiff right out of the box due to the choice of materials, but they will gradually become softer. Nonetheless, the task of softening them remains, alongside the crucial step of molding them into the correct cupping shape.

Graham, during our conversation mentioned the development of a unique palm pattern that diverges from off-the-shelf glove designs. These gloves are meticulously crafted to adapt more naturally to the hand’s creases, ensuring a flatter fit and forming a deeper cup for ball-catching. To initiate the molding process, users are encouraged to bend the gloves from the little finger to the thumb, aligning with the natural one-handed cupping position. Pressing down on the palm to flatten it is essential. If necessary, as the gloves soften and begin to mold, a ball can be employed to shape the gloves around it.

Once the user feels prepared, they can practice throwing the ball from hand to hand. This action further enhances the gloves’ fit and ensures they become precisely as desired. The good news is that this process won’t demand an excessive amount of time; soon enough, Graham’s gloves will conform perfectly to the user’s needs.

How to Look After the Gloves

In the event that your gloves become soiled or scuffed, it is advisable to remember to clean them using a suitable leather treatment. The recommendation here is to employ saddle soap or a leather cream like Horseman’s One Step, which can be conveniently found online. These products not only cleanse the leather but also nourish it, preserving its quality.

Once your gloves have been treated with the aforementioned leather treatment or your preferred alternative, the next step is to give them a polished finish using regular shoe polish. A variety of polish colors, including white, can be obtained from shoe repair shops.

Maintaining a routine of using cleansing leather cream and regular polishing is essential to keep the backs of the gloves supple, especially in the face of exposure to moisture and perspiration. By following these steps, your gloves can withstand the test of time without issue.

It’s crucial to refrain from wearing the gloves for extended periods once the rubber in the center of the palm has worn away. Contact between the ball and the exposed leather may lead to tearing. It’s worth noting that although these gloves are crafted from high-quality cowhide, they remain a natural material and require proper care to prevent deterioration.

Additionally, avoid wearing wet inners as they can lead to lining deterioration and make the gloves stiff as they dry out. Never attempt to secure any loose rubber with superglue, as it can crystallize and adversely affect the leather’s condition.

Your gloves are an investment, and proper care ensures they remain in prime condition for an extended period.

Where can you get yours?

Graham is now found on Instagram @ClassicKeeper1 or on his website

Old City, New City!

Leaving Munich for California: Finding Community and Overcoming Social Barriers

I recently moved from Munich, Germany to California, USA for a new job. In this post, I want to share my experiences and insights about the transition from Munich to California, the challenges I faced, and the lessons I learned.

One of the challenges I faced when moving to California was building a new social network outside of work. In Munich, I found it harder to connect with new people and develop close friendships. In contrast, I found the social network in California to be more open and accepting. I think this has a lot to do with the cultural differences between Germany and the USA, where social interactions are often more relaxed and informal.

Despite the more open social network, it still took some time to find a community outside of work. My partner and I tried various approaches, such as joining local clubs, attending community events, and volunteering. These activities allowed us to meet new people and build friendships with like-minded individuals. We also made an effort to invite coworkers and neighbors over for dinner, which helped us build stronger connections.

Another challenge I faced when moving to California was getting used to the different cultural norms and social expectations. In Munich, for example, people are generally more reserved and formal in social situations. In contrast, California has a more relaxed and informal social culture. I found that adapting to these cultural differences took some time, but it was worth it in the end.

Overall, my experience of moving from Munich to California taught me a lot about the importance of community and social connections. It showed me that building a new social network takes time and effort, but it’s worth it in the end. It also taught me the value of being open-minded and adaptable, and the importance of embracing new experiences and cultures. If you’re considering moving to a new city or country, my advice would be to be patient, be open to new experiences, and be willing to put yourself out there to make new connections.

Until next time, Auf Wiedersehen!

Fuck Motivation

Fuck Motivation. It is a fickle and unreliable little shit, and it is not worth your time. 

Better to cultivate discipline than to rely on motivation. Force yourself to do the things. Force yourself to get out of bed and practice. Force yourself to work. 

Motivation is fleeting and it is easy to rely on because it requires no concentrated effort to get. Motivation comes to you, you don’t even have to chase it. 

Discipline is reliable, motivation is fleeting. The question is not how to keep yourself motivated, but to how to train yourself to work without it. 

Pair F45 Lionheart to Apple Watch

The F45 Lionheart sensor is a heart rate sensor that shows your heart rate and progress in the F45 Studios. Here is how to link the F45 to the Apple Watch. 

image

How to pair Lionheart to Apple Watch

  1. Strap the Lionheart to your chest
  2. On the Apple Watch, launch the Settings App
  3. Tap on Bluetooth
  4. Select Heart Rate Sensor under Health Devices

Setting up Homebridge on Raspberry Pi

Hardware Required

  • Raspberry Pi
  • MicroSD
  • SD Card Reader
  • Another computer/ Screen+Keyboard

Software Required

Process

  1. Download latest version of Raspbian and write the image on the SD card using Etcher

  2. Once SD card is ready, install it in the Raspberry Pi and boot the Raspberry Pi

    ​ The default username for Raspbian is pi and the password is raspberry.

  3. Enable SSH on the Pi

    ​ Type sudo raspi-config

    ​ Select Interfaces > SSH > Enable

  4. If using Linux or Mac as your primary computer then you can access the Pi with the following command

    ssh pi@raspberrypi.local

    Or if using Windows, use a utility such as Putty (Download)

  5. Basic setup preparations

    sudo apt-get update

    sudo apt-get upgrade

  6. Install Node

    curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -

    sudo apt-get install -y nodejs

  7. Install Homebridge

    sudo npm install -g --unsafe-perm homebridge

  8. Setup Config.json

    sudo nano ~/.homebridge/config.json

    ​ Paste the following in the json file (Feel free to edit the username, port, and pin)

    {
           "bridge": {
                   "name": "Homebridge",
                   "username": "AA:71:3D:E3:CE:10",
                   "port": 51871,
                   "pin": "137-14-151"
           },
           "accessories": [],
           "platforms": []
    }            
    

    ​ Ctrl+X and type Y to save the config.json

  9. Setup to start Homebridge on startup

    ​ 9.1. sudo nano /etc/default/homebridge

    ​ Paste the following

    ## Defaults / Configuration options for homebridge
    # The following settings tells homebridge where to find the config.json file and where to persist the data (i.e. pairing and others)
    HOMEBRIDGE_OPTS=-U /var/homebridge -I
    # If you uncomment the following line, homebridge will log more 
    # You can display this via systemd's journalctl: journalctl -f -u homebridge
    # DEBUG=*    
    

    ​ 9.2. sudo nano /etc/systemd/system/homebridge.service

    ​ Paste the following​

    [Unit]
    Description=Node.js HomeKit Server 
    After=syslog.target network-online.target
    
    [Service]
    Type=simple
    User=homebridge
    EnvironmentFile=/etc/default/homebridge
    ExecStart=/usr/local/bin/homebridge $HOMEBRIDGE_OPTS
    Restart=on-failure
    RestartSec=10
    KillMode=process
    
    [Install]
    WantedBy=multi-user.target
    

    ​ 9.3. Create a user to run service sudo useradd --system homebridge

    ​ 9.4. sudo mkdir /var/homebridge

    ​ 9.5. sudo cp ~/.homebridge/config.json /var/homebridge/

    ​ 9.6. sudo cp -r ~/.homebridge/persist /var/homebridge

    ​ 9.7. sudo chmod -R 0777 /var/homebridge

    ​ 9.8. sudo systemctl daemon-reload

    ​ 9.9. sudo systemctl enable homebridge

    ​ 9.10. sudo systemctl start homebridge

    ​ 9.11. systemctl status homebridge to check the status of the service

Homebridge is now running and ready to install plugins

Recommended Plugins

​ Homebridge UX (Link)

sudo npm install -g --unsafe-perm homebridge-config-ui-x

Configuration

​ Add this to your homebridge config.json​

"platforms": [
    {
      "platform": "config",
      "name": "Config",
      "port": 8080,
      "sudo": true,
      "restart": "sudo -n systemctl restart homebridge",
      "log": {
        "method": "systemd",
        "service": "homebridge"
    }
]   

The Land of the Rising Sun

When I was told at work that I would be visiting Tokyo on a business trip for some training, I was really hopeful to find if we would have a couple days to look around the city – only later to find out that we would! 

On a Monday morning, Ian (my work colleague) and I head to the airport to catch our flight to Tokyo from London. After a long and tiresome non-stop flight (BA’s economy seats are pretty cramped).

Landing at 11 am (Local Time), the jetlag well and truly hits me. We wait for our host Tatsuro-san to take us to our lodging. On reaching the hotel in the heart of the Akhibhara. We decide to take a nap and then take a walk to explore the area. 

Over the next couple days we had training through the day and exploration in the evenings.

On Day 1 evening was we went exploring Akhibhara, better known as the “Electronic City”. When people say this is the Mecca for Nerds, they are not joking. The most difficult part of the experience of being in Akhibhara is sheer scale and amount of sensory inputs around, but I am going to try. Imagine Oxford Street in London or any of the biggest shopping areas in a large city and replace all the shops with electronic/geeky stuff – That is Akhibhara. 

On the final day before our time to leave we got around Tokyo. The view from Tokyo Skytree was particularly breathtaking

Here are few other photos from the day out in Tokyo

Then finally it was the day to leave on the long and arduous flight.

The Charm of the Spoken Word

I have always been drawn into spoken word, the speeches, the story telling and in the recent past this has been podcasts – The Internet’s Radio. And there is no better podcast than 99% Invisible

Listening to 99% Invisible is a blessing and curse. Every single episode you learn something new and then there is not one conversation you can have without saying “Hey, there is fantastic 99pi episode on that”. 

Free Speech

Recently Twitter banned Milo Yiannopoulos and there has been much uproar. It seems Twitter has taken a stance (which they have a right to, by the way). I think there does come a point where one should not be able get away with saying anything and not face the consequences. 

There is the argument of Free Speech, which only means one is allowed to say what one wants, but does not mean calling someone names and not expecting to be punched in the face. Also on the other hand, as much as it is free speech for share the opinions, it is also the right for the other person to be hurt (and it is NOT a right to hurt another person). 

I think XKCD comic captures it perfectly. 

image

Holidays Make Us Happier Than Both Romance and Work Success

Being on holiday makes people way happier than anything else in their lives, even romance or getting a promotion at work. So if you’re feeling low maybe it’s time to get your next holiday booked in.

According to new research from online marketplace HomeAway, more than 32 percent of people taking part in their happiness survey rated being on holiday as the best moment in their lives. With work success coming in second place and spending time with their partners in third.

When it comes to which holidays we all prefer the most, only one percent said their hen or stag do was their best trip, which for anyone who’s been to one will testify is likely to be true. But the first holiday with their kids rated most highly, with 26 percent of people saying it was the best trip away of their lives and honeymoons coming in at second place.

Interestingly, those surveyed said that they’re choosing to enjoy their holiday more by switching off all of their tech. More than a fifth of those surveyed revealed that they put in extra hours before their set off so that they can relax more and “switch off”. The results showed that 42 percent switch off their mobile phones and disable their emails while they’re away, one in five issue a blanket ban on work conversations and a further 22 percent refuse to even read the news while they’re holidaying.

SOURCE : Llifehacker UK